TOP 3 ALGAE AND MOSS REMOVER RECOMMENDED BY EXPERTS

Cooling tower is one of the important equipment in factories and factories. However, cooling towers often have problems with algae and algae growth on the surface. This not only affects the cooling efficiency of the cooling tower, but also reduces the life and durability of the equipment. Therefore, the use of algae and moss remover is an effective solution to solve this problem.

The best algae and moss remover on the market

Currently, on the market, there are many types of moss removal chemicals for cooling towers. However, here are some of the chemicals that are thought to be the best:

Chemicals to remove algae in the cooling system – LTV C3010L

LTV C3010L is a chemical to remove algae in the cooling system. The product is a mixture of oxidizing halogens, liquid. LTV C3010L has the ability to limit clogging of pipes due to microbial growth in open cooling systems. Compared with chlorine products, LTV C3010L is less corrosive and even works well with water with pH > 9.

✔️Specifications:

• Halogenated concentration: At least 10%
• Density: From 1.18 – 1.22
• pH: 9 – 12
• Appearance: Colorless or straw yellow, liquid form

✔️Advantages of the product:

• Environmental friendliness
• Effective over a wide pH range
• Low dosage
• Cost is optimized
• Easy control

✔️Using:

When using the product, the supplier’s technical department will assist in deciding the optimal dosage. Typically, the dosage of LTV C3010L product will be determined by the pH of the water, system size, retention time, propensity to clog and the system’s halogen requirements. The dosing process can be controlled by ORP controller or meter.

>>> Read more: INSTRUCTIONS TO CLEAN THE COOLING TOWER

Algae Inhibitor – LTV C2250

LTV C2250 is one of the chemicals produced by Long Truong Vu, which inhibits algae in the cooling system.

✔️Specifications

• Appearance: Liquid
• Packing: Can 30Kg
• Ingredients: Active ingredients include Isothiazolones and Bronopol, mixed in appropriate proportions to achieve the highest and stable effect.

✔️Application:

• Inhibition of algae in the cooling system
• The frequency of adding chemicals to the system can vary depending on different conditions (normally 2 times/week).

✔️Advantage:

• Treatment of algae in cooling towers with LTV C2250 will not be affected by hardness, concentration of dissolved salts, copolymers and the presence of oil contaminants.
• LTV C2250 not only inhibits moss and algae growth, but also helps to deal with Legionella bacteria.
• LTV C2250 contains only biodegradable organic compounds, not heavy metals.
• Treating cool water with LTV C2250 will be environmentally friendly with bacterial water, and be converted into milk.
• LTV C2250 is a low-foaming, non-oxidizing, non-oxidizing, low-foaming microbial compound with 80% active.
• Effectively eliminates microorganisms in a wide range.
• Inhibits microbial growth on evaporator surfaces and heat transfer devices.

Microbiological inhibitor in cooling system – LTV C2200

LTV C2200 is one of the most powerful, broad-spectrum herbicides.

✔️Specifications:

• Appearance: Colorless to pale yellow liquid
• Density: 1.00 – 1.10
• pH: 2 4
• Solubility: Well soluble in water, glycol, alcohol and polar solvents.
• Toxicity: LD50: >500mg/Kg (direct)
• The active ingredients are Bronopol and Isothiazolones, which are mixed in appropriate proportions to achieve high, stable efficacy.
• LTV C2200 is a mixture of Glutaraldehyde and non-toxic substances

✔️Application

• Use to eliminate microorganisms
• LTV C2200 not only helps to treat water in open cooling systems, but also helps to treat domestic water, or water in paper factories, etc.

✔️Advantages of the product:

• No foaming
• Has the ability to destroy powerful microorganisms
• Helps inhibit the growth of microorganisms
• Effective over a large pH range
• Degradable, environmentally friendly
• Has low toxicity
• LTV C2200 can be added to the open cooling system at any time during operation.

>>> Read more: HARMS OF BOILER SCALE AND EFFECTIVE SOLUTIONS

Why should we use algae removal chemicals for cooling towers?

Cooling towers are an important part of industrial environments, especially in manufacturing plants. However, over time, algae can adhere to the surfaces of cooling towers, causing problems such as reduced performance and increased repair and maintenance costs.

To solve this problem, using algae remover chemicals is an effective measure, and brings many benefits such as:

1. Moss and Algae Removal: Moss and algae can grow rapidly in a cooling tower and clog pipes, affecting the cooling performance of the tower. Using a moss remover helps remove these algae and algae and reduces the risk of clogging.
2. Guaranteed cooling performance: Reducing algae and algae in the cooling tower increases cooling efficiency. When the water pipe is ventilated, the water can circulate easily and the cooling performance is better.
3. Cost savings: Using chemical algae remover helps to reduce clogging and increase cooling efficiency, helping to save energy costs and cooling tower maintenance costs. Regular cleaning and descaling will prolong the life of the system and reduce replacement of damaged parts.

However, the use of chemicals needs to be done carefully to ensure safety for people and the environment. It is also important to choose the right chemicals and to follow safe procedures when using chemicals.

Notes when using algae and moss remover

When using chemicals to remove mold and mildew for cooling towers, the following points should be noted:

1. Choose the right chemical: Choose a chemical that is suitable for the type of moss and algae present in the cooling tower to achieve the best effect and minimize the impact on the environment.
2. Carefully read instructions for use: Before using chemicals, it is necessary to carefully read the instructions for use and strictly follow the instructions on dosage, time and method of using chemicals.
3. Use personal protection: When in contact with chemicals, it is necessary to wear full personal protective equipment including masks, gloves, goggles and chemical-resistant jackets to protect health.
4. Ensure good ventilation: Adequate fresh air should be ensured during chemical application to avoid inhalation of toxic vapors.
5. Regular cleaning: Perform regular cleaning of the cooling tower to minimize the growth of algae and algae, thereby reducing the use of chemical algae removers.
6. Adjust pH: If necessary, it is necessary to adjust the pH of the water in the cooling tower before using chemicals for the best effect.
7. Store chemicals properly: Store chemicals in a cool and dry environment, avoid exposure to sunlight and explosives.
8. Compliance with the above notes will help ensure the safety of chemical users and minimize the impact on the environment.

Above are the best algae and moss remover that businesses should use today. However, to ensure the highest efficiency, users should choose quality chemicals, mixed in proportions suitable for system conditions. If you have any questions, do not hesitate to contact Hotline: 0914 711 499 for the best support and advice!